Leathercraft soldering iron - Temperature-controlled creasing machine soldering iron tip: "To do a good job, one must first sharpen one's tools." Create exquisite leather crafts.

Leather Craft Soldering Iron Tips for Temperature-Controlled Edge Creasers: To do good work, one must first sharpen one's tools – crafting exquisite leather goods

Edge Creaser Tips: Types and Uses

1. Temperature-Controlled Edge Creaser Tip Types

• Sword-shaped Wax Spatula: Suitable for edge paint and waxing.
• Polishing Iron Head: For ironing leather
• Copper Rod: Heats and shrinks leather fibers inside holes, e.g., watch strap holes.
• Connecting Rod: Can be used with custom-made logo copper molds, with M5 threaded depth within 7mm.
• S: Creates a beautiful leather line.
• C: Round groove Creates a rounded raised edge, smaller ironing area, easier for curves.
• F : Grooved Creates a raised edge, can be used with pricking irons.
• Fn : Round groove Creates a rounded raised edge, heats the top folded edge, for example, card slots.
• L : Rolling and creasing, presses the edge flat.
• M: Round groove Creates a rounded raised edge, circular iron, easier for curves.
• Y : Grooved for creasing, can be used with a wide skiving knife for thinning at bends.
• FNA : Grooved for a raised edge, heats the top folded edge, for example, card slots.
• MY : Grooved for a raised edge, circular iron, easier for curves.

2. Decorative Line Creasers

• No. 2 & No. 3: Most commonly used decorative line creasers.

• Fn2: Suitable for small areas like card slots.

• Fn3: Suitable for larger areas like handbags, shoulder straps, and belts.

• F-type: Applicable to materials where the leather surface itself has texture.

3. Round Groove and Embossing Creasers

• Fn / C / M (Round Groove Creasers)

  • The line pressed by M is slightly thicker than Fn and C.

  • Stability comparison: Fn > M > C.

  • C, M are more suitable for curved edge creasing than Fn, but also applicable for straight edge creasing.

• F-type (Grooved): Applicable for specific texture effects.

4. Grooving and Rolling Creasers

• Y-type (Grooving)

  • Y2: 2mm from the edge, groove width 1.5mm.

  • Y3: 3mm from the edge, groove width 1.5mm.

  • Customizable sizes are available upon request, usually requiring a back groove or thinning with a wide skiving knife.

• L-type (Rolling)

  • L2: Pressed flat width 2mm.

  • L3: Pressed flat width 3mm.

5. Inner Round, Hot Stamping, and Shaping Creasers

• M5 Connecting Rod + Copper Head: Suitable for inner round edge paint (e.g., watch lugs).

• M5 Connecting Rod + Copper Iron: Suitable for hot shaping leather.

• M5 Connecting Rod + Copper Mold: Can be used for hot stamping, debossing logos, ironing leather, etc., suitable for small-sized logo stamping.

Creaser Head Selection Guide

Essential Creaser Heads

• Edge Paint/Wax: S0.5, Sword-shaped.

• Decorative Lines: Fn2, Fn3.

Special Needs Creaser Heads

• Grooving: Y-type (customizable).

• Rolling: L-type.

• Curved Embossing: C-type, M-type.

• Inner Round Edge Paint: M5 + Copper Head.

• Hot Stamping and Debossing: M5 + Copper Mold.